docs / linux / configure-raid-1
Configure RAID 1
This example is based on the environment like follows. It shows to install new Disks [sdb] and [sdc] on this computer and configure RAID 1.
textcopy
root@dlp:~# df -h
Filesystem Size Used Avail Use% Mounted on
tmpfs 796M 1.1M 795M 1% /run
/dev/mapper/ubuntu--vg-ubuntu--lv 77G 8.2G 65G 12% /
tmpfs 3.9G 0 3.9G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
/dev/vda2 2.0G 126M 1.7G 7% /boot
tmpfs 796M 4.0K 796M 1% /run/user/0Create a partition on new Disks and set RAID flag.
textcopy
root@dlp:~# apt -y install parted
root@dlp:~# parted --script /dev/sdb "mklabel gpt"
root@dlp:~# parted --script /dev/sdc "mklabel gpt"
root@dlp:~# parted --script /dev/sdb "mkpart primary 0% 100%"
root@dlp:~# parted --script /dev/sdc "mkpart primary 0% 100%"
root@dlp:~# parted --script /dev/sdb "set 1 raid on"
root@dlp:~# parted --script /dev/sdc "set 1 raid on" Configure RAID 1.
textcopy
# install required tools
root@dlp:~# apt -y install mdadm
root@dlp:~# mdadm --create /dev/md0 --level=raid1 --raid-devices=2 /dev/sdb1 /dev/sdc1
mdadm: Note: this array has metadata at the start and
may not be suitable as a boot device. If you plan to
store '/boot' on this device please ensure that
your boot-loader understands md/v1.x metadata, or use
--metadata=0.90
Continue creating array? y
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
# show status
root@dlp:~# cat /proc/mdstat
Personalities : [raid1]
md0 : active raid1 sdc1[1] sdb1[0]
83817472 blocks super 1.2 [2/2] [UU]
[====>................] resync = 24.9% (20902592/83817472) finish=7.4min speed=140632K/sec
unused devices: <none>
# status turns like follows if syncing finished
# that's OK to configure RAID 1
root@dlp:~# cat /proc/mdstat
Personalities : [raid1]
md0 : active raid1 sdc1[1] sdb1[0]
83817472 blocks super 1.2 [2/2] [UU]
unused devices: <none>If a member Disk in RAID array would be failure, re-configure RAID 1 like follows after swapping new Disk.
textcopy
# the status is like follows in failure
root@dlp:~# cat /proc/mdstat
Personalities : [raid1]
md0 : active raid1 sdc1[1] sdb1[0]
83817472 blocks super 1.2 [2/1] [U_]
unused devices: <none>
# after swapping new disk, re-configure like follows
root@dlp:~# mdadm --manage /dev/md0 --add /dev/sdc1
mdadm: added /dev/sdc1
root@dlp:~# cat /proc/mdstat
Personalities : [raid1]
md0 : active raid1 sdc1[1] sdb1[0]
83817472 blocks super 1.2 [2/2] [UU]
[====>................] resync = 24.9% (20902592/83817472) finish=7.4min speed=140632K/sec
unused devices: <none>To use RAID partition, format with a filesystem and mount it on a directory as usual.
textcopy
# for example, format with ext4 and mount on /mnt
root@dlp:~# mkfs.ext4 /dev/md0
root@dlp:~# mount /dev/md0 /mnt
root@dlp:~# df -hT
Filesystem Type Size Used Avail Use% Mounted on
tmpfs tmpfs 795M 1.1M 794M 1% /run
/dev/mapper/ubuntu--vg-ubuntu--lv ext4 76G 6.7G 66G 10% /
tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm
tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock
/dev/vda2 ext4 2.0G 127M 1.7G 7% /boot
tmpfs tmpfs 795M 4.0K 795M 1% /run/user/0
/dev/md0 ext4 79G 24K 75G 1% /mnt
# to set in fstab
# because the name of md*** sometimes changes when hardwares are changed, set it with UUID
root@dlp:~# blkid | grep md
/dev/md0: UUID="de532c2c-67a6-44bf-84d8-8d5eba55e752" BLOCK_SIZE="4096" TYPE="ext4"
root@dlp:~# nano /etc/fstab
# set with UUID
/dev/disk/by-id/dm-uuid-LVM-OVORwCq99gl1jfieBtHmuXzxuK5vy6IBH9gC1yhsecDaXjqfv9aWK3K1rd7AZczP / ext4 defaults 0 1
# /boot was on /dev/vda2 during current installation
/dev/disk/by-uuid/53b66f54-ce3a-4717-87c8-c841549386bf /boot ext4 defaults 0 1
/swap.img none swap sw 0 0
/dev/disk/by-uuid/de532c2c-67a6-44bf-84d8-8d5eba55e752 /mnt ext4 defaults 0 0
# that's OK, even if the name of md*** are changed, it is mounted normally
root@dlp:~# df -hT /mnt
Filesystem Type Size Used Avail Use% Mounted on
/dev/md127 ext4 79G 24K 75G 1% /mnt